To enter filters, sect Filter on the top of your board.
There are 5 options of filtering and they can be combined.
- by any typed text
- by choosing labels
- by choosing users
- by card status (only if statuses are enabled in this board)
- by dates
You can choose 2 other filtering options:
- Match all - in this scenario, two filtering conditions must appear simultaneously to show you results.
- Match any - in this scenario, at least one filtering circumstance must be fulfilled to show you results.
And you can also apply NOT on any of the 5 options.
by any typed text
You can filter your Cards by any text you want. Choose to filter by text and write down any keyword you need.
You can filter your cards in a Board by using Card status filter. You can choose one or multiple of Card statuses which you configured in Card statuses settings.
Cards filtering is also possible by using labels. You can set up to 6 labels per a Board (See Set label names for information about who set up labels). You can choose one or multiple labels to return the desired cards.
by choosing users
by choosing dates
you can now filter all your cards by their due dates.
TIP: try to combine these 4 methods to get very exact results!
When you close the Filter panel the filtering is still active – you can see that because the Filter icon is blue.
You can clear filter by going into Filter section and choosing Clear filer. You can close the filter section and clear off filter using the X button.
Even if you enter a card and navigate back – the board remembers the filters. Once you navigate away from the Board and come back filters will be reset.
The indicator will appear under the list’s header and will show how many cards are hidden because of the filter.